Pro15 Features

• 300 Watts RMS continuous,600Watts program, 1200 Watts peak
• 4 Ohms
• 15’’ (381mm) speaker
• 1’’ (25mm) Compression driver
• Dispersion: 90° x 40°
• Frequency response: 50 Hz - 22 kHz
• Efficiency: 98dB
• Two ¼’’ (6.35mm) jack and two Neutrik® Speakon® sockets
• Full range with high frequency limiter
• Resilient carpet covered
• Silver steel grille
• Steel stand adaptor
• Teardrop handles
• Made in the UK

Pro15 Dimensions & Weight

• Dimensions: 25.6’’ (650mm)H x 18.1’’ (460mm)W x 15.4’’ (390mm)D
• Weight: 48.5lbs (22kg)

PV1500 Features

• Stereo Mode: 4 Ohms: 500 Watts RMS x 2
• Stereo Mode: 8 Ohms: 300 Watts RMS x 2
• Bridge Mode-Mono: 8 Ohms: 1000 Watts RMS
• Inputs: XLR, ¼ inch and barrier strip
• Detented input gain control
• Binding post and Speakon® output connectors
• Seperate Speakon® mono bridge output
• Mode switch for stereo or bridge operation
• Low-cut filter switch for 40 Hz low cut filter
• Built-in crossover with 150 Hz switch
• Thru/low output jacks and high output jacks
• LED indicators for input signal, DDT™ & power
• Peavey’s famous DDT™ compression system
• Total Harmonic Distortion: Less than 0.03% 20 Hz to 20 K, 10 dB below rated power in stereo mode both channels driven
• Frequency Response: 20 Hz to 20 kHz
• Damping Factor: greater than 300
• Hum and Noise: 100 dB
• Rack Spaces: 2 RU
• *Not recommended for continuous 2 ohm stereo/4 ohm bridge duty.

PV1500 Dimensions

Unpacked: 3.50" H x 19.00" W x 16.00" D - 35.50 lbs.

Packed: 6.25" H x 22.50" W x 21.00" D - 42.00 lbs.