Many of the elements from the award-winning VoiceMaster have been innovated upon. In addition, the unit features a whole host of new processors designed to ensure you have all you require to make the most of the artist you’re recording.

The award-winning Class A preamp captures every nuance from any source, whilst latency-free monitoring ensures direct and delay-free mix control. Tools such as the voice-optimised EQ, Vintage Harmonics and Tube Sound allow you to get creative with a touch of class, putting your own stamp on every recording.

All of this, combined with the optional 24 bit, 96 kHz digital output board means that VoiceMaster Pro is the perfect interface between your microphone and your DAW or other recording media, placing the ultimate tracking solution firmly within your grasp.

Mic Input Response

• Gain range = 0dB to 60dB continuously variable
• Input Impedance = 1k4 Ohms from 10Hz to 200kHz
• EIN = 128dB measured at 60dB of gain with 150 Ohm terminating impedance and 20Hz/22KHz bandpass filter
• THD at minimum gain (0dB) = .0004% measured with +16dBu input signal and with a 20Hz/22KHz bandpass filter
• THD at maximum gain (60dB) = .003% measured with a –36dBu input signal and with a 20Hz/22KHz bandpass filter
• THD at maximum Input level (26.5dBu) = .005% measured with a 20Hz/22KHz bandpass filter
• Frequency response at minimum gain (0dB) = flat at 10Hz and –2dB down at 200kHz
• Frequency response at maximum gain (60dB) = –2dB down at 10Hz and 200kHz
• CMRR at full gain (60dB) = 80dB

Line Input Response

• Gain range = -10dB to +10dB continuously variable
• Input Impedance = 10k Ohms from 10Hz to 200kHz
• Noise at main output with gain and fader set to unity (0dB) = -94dBu measured with a 20Hz/22kHz bandpass filter
• Signal to noise ratio relative to max headroom (27dBu) = 121dB
• Signal to noise ratio relative to 0dBfs (+22dBu) = 116dB
• THD at unity gain (0dB) = .0006% measured with 0dBFS (+22dBu)
• Input signal with a 20Hz/22kHz bandpass filter
• Frequency Response at unity gain (0dB) = 0.25dB down at 10Hz and –3dB down at 200kHz

Instrument Input Response

• Gain range = 0dB to 40dB continuously variable
• Input Impedance >1MOhm
• Noise at minimum gain (0dB) = -90dBu measured with a 20Hz/22kHz bandpass filter
• Noise at maximum gain (40dB) = -78dBu measured with a 20Hz/22kHz bandpass filter
• THD at minimum gain (0dB) = .006% measured with –10dBu input signal and with a 20Hz/22kHz bandpass filter
• Frequency Response at unity gain (0dB) = 0.5dB down at 10Hz and –1dB down at 200kHz
• Frequency Response at maximum gain (60dB) = 6dB down at 10Hz and –1dB down at 200kHz

High Pass Filter

• Roll off = 18dB per octave 3 pole filter
• Frequency Range = continuously variable from 30Hz to 400Hz measured at the 3dB down point

Output Meter

• Calibrated for 0dBFS = +22dBu and indicates the level after the output fader being sent to both the internal AD converter and the VoiceMaster Pro XLR output
• O/L LED = is lit when any section of the unit (including the cans output) reaches a level greater than 0dBFS (actual level is +22.4dBu)